TEXT SIZE: LARGER

You are here:

PLEXTALK Americas English main > SUPPORT > Discontinued products > PLEXTALK PTN1/PTN1 Pro > Firmware Upgrades > Firmware Instruction

facebook google bookmark twitter

SUPPORT

main contents


Installation Instructions for ISO Image file

Step 1: Download file and create installation CD.

  • Download the firmware file to your computer.

<By Easy CD Creator>

  • Double-click the file, then launch Easy CD Creator.
  • Press OK and start burning an installation CD.

<By Nero Burning ROM>

  • Start Nero Burning ROM Ver.5.5.
  • Select “Open” from “File” pull-down menu, then the common dialog pops up.
  • In the common dialog, change “File of type” to “Image Files(*.nrg;*.iso; *.cue)”.
  • Start CD burning.

<By WinOnCD>

  • Start WinOnCD3.70.
  • Select New from File menu, then New project dialog will be popped up.
  • Change the tab from Favorites to “Other”, and select Track image.
  • Select Track Image and press OK button, then will be returned to the main window.
  • Select ISO image file in the explorer window, and press F7 key.
  • Select Make CD from Record menu, then Disc Properties and Recording Settings dialog will be displayed at the lower window.
  • Press the Record button, or Alt + R key, then start burning CD. Note: You can be setting up the recording setting at the lower windows when required.
  • After writing process completed, message window will be popped up.

Step 2: Install Firmware into PLEXTALK PTN1/PTR2/PTR1.

In case of PTN1

  • Connect AC adaptor.
  • Turn on the PLEXTALK PTN1.
  • Insert installation CD.
  • The installation process will be executed automatically and takes approximately 3 minutes.
  • When upgrade installation is completed, PTN1 will automatically re-boot and eject the CD.

In case of PTR2

  • Disconnect USB cable.
  • Connect AC adaptor.
  • Turn on the PLEXTALK PTR2.
  • Insert installation CD.
  • Press play key.
  • The installation process will be executed automatically and takes approximately 3 minutes.
  • When upgrade installation is completed, PTR2 will automatically re-boot and eject the CD.

In case of PTR1

  • Remove PC card and disconnect USB cable.
  • Connect AC adaptor.
  • Turn on the PLEXTALK PTR1.
  • Insert installation CD.
  • Press play key.
  • The installation process will be executed automatically and takes approximately 3 minutes.
  • When upgrade installation is completed, PTR1 will automatically re-boot.
  • Remove installation CD.

Installation Instructions for USB Updater file

Step 1: Download file

  • Download the firmware file to your computer

Step 2: Install Firmware into PLEXTALK

In case of PTR1

  • Connect the PTR1 to AC power using the PTR1 power adapter.
  • Remove the PC card, if one is inserted in the unit.
  • Turn on the power and eject CD, if one is loaded.
  • Connect the PTR1 to your PC using the supplied USB cable.
  • Execute the downloaded file (PTR1USBUP204***.exe), from the saved to location of your PC.
  • Proceed with the installation, following the instruction provided on your PC’s screen.
    Note: During the updating process, you will see the following message: “Shut down”. The process is still updating your PTR1′s internal program. Do not operate the PTR1 until you receive further messages, presented on your PC, instructing you to do so.
  • Press OK after the following message is displayed on your PC “In order to finish the update, you need a turn off your PC then remove the USB cable from PTR1. Could you turn off the PC now?”
  • You may, now, turn off the PC and disconnect the USB cable from your PC. The update is completed.
    Note: All memory is refreshed and bookmarks have been deleted when you upgrade from Version “1.**” to “2.**”.

In case of PTR2

  • Connect the PTR2 to AC power using the PTR2 power adapter.
  • Turn on the power and eject CD, if one is loaded.
  • Set the USB destination to “CD drive” in the PTR2 control panel menu.
  • Connect the PTR2 to your PC using the supplied USB cable.
  • Execute the downloaded file (PTR2USBUP108***.exe), from the saved to location of your PC.
  • Proceed with the installation, following the instruction provided on your PC’s screen.
    Note: During the updating process, you will see the following message: “Shut down”. The process is still updating your PTR2′s internal program. Do not operate the PTR2 until you receive further messages, presented on your PC, instructing you to do so.
  • Press OK after the following message is displayed on your PC “In order to finish the update, you need a turn off your PC then remove the USB cable from PTR2. Could you turn off the PC now?”
  • You may, now, turn off the PC and disconnect the USB cable from your PC. The update is completed.

Support for Other Products

SALES

©2011 Shinano Kenshi Co., Ltd. All rights reserved.
Plextor and Plextalk logo are registered trademark of Shinano Kenshi Co., Ltd.
Other brands and products are trademarks of their respective holder/s.
Specification subject to change without notice.