TEXT SIZE: LARGER

You are here:

PLEXTALK Americas English main > SUPPORT > PLEXTALK Linio > Firmware Upgrades > Firmware Instruction

facebook google bookmark twitter

SUPPORT

Go to PLEXTALK Linio product page

Installation Instruction via Network

  • Connect the PLEXTALK Linio to AC power using the Linio power adapter.
  • If the PLEXTALK is not connected to the network, connect it to the network.
  • Press the Menu key.
  • Use the Left or Right key to select “System settings” and press the Enter key.
  • Use the Left or Right key to select “Network update” and press the Enter key.
  • When there are no available updates, PLEXTALK announces the confirmation message. Then press the Enter key to exit the menu.
  • When there are updates, use the Left or Right key to select the update that you would like to apply and press the Enter key. Downloading of the update starts.
  • After downloading is completed, the update process starts automatically. Then the PLEXTALK restarts at the end of the update process.

Installation Instruction via Internal memory or SD card

Step 1 : Download file

  • Download the firmware file to your computer.
  • Execute the .exe file or unzip the .zip file. The program creates new folder “PlexVerUp” and copies data for firmware upgrade.
  • Copy the created folder to the root of the Internal memory or SD card.

Step 2-1 : Install Firmware into PLEXTALK via Internal memory

  • Connect the PLEXTALK Linio to AC power using the Linio power adapter.
  • Turn on the Linio.
  • The installation process will be executed automatically and takes approximately 4 minutes.
  • When the upgrade installation is completed, the Linio will automatically re-boot.
  • After the firmware upgrade, delete the created folder.

Step 2-2 : Install Firmware into PLEXTALK via SD card

  • Connect the PLEXTALK Linio to AC power using the Linio power adapter.
  • Insert the SD card with the created folder and turn on the Linio.
  • The installation process will be executed automatically and takes approximately 4 minutes.
  • When the upgrade installation is completed, the Linio will automatically re-boot.
  • Remove the SD card after the firmware upgrade and delete the created folder.

Support for Other Products

SALES

©2011 Shinano Kenshi Co., Ltd. All rights reserved.
Plextor and Plextalk logo are registered trademark of Shinano Kenshi Co., Ltd.
Other brands and products are trademarks of their respective holder/s.
Specification subject to change without notice.