SUPPORT

Step 1 : Download file

Download the firmware file to your computer.
Unzip the .zip file. The program creates new folder “PlexVerUp” and copies data for firmware upgrade.
Copy the created folder to root of SD card.

Step 2 : Install Firmware into PLEXTALK

In case of PTP1
Connect the PTP1 to AC power using the PTP1 power adapter.
Insert the SD card with the created folder and turn on PTP1.
The installation process will be executed automatically and takes approximately 4 minutes.
When upgrade installation is completed, PTP1 will automatically re-boot.
Remove SD card after the firmware upgrade and delete the created folder.