Go to contents Go to plextalk.com
[ Site Map ]
[ Home  |  Products  |  Support  |  Download  |  Sales  |  About PLEXTALK  |  Contact Us ]
Download

PTN2

Installation Instructions for SD card Updater file
Step 1: Download file
  • Download the firmware file to your computer.
  • Execute the .exe file or unzip the .zip file. The program creates new folder "PlexVerUp" and copies data for firmware upgrade.
  • Copy the created folder to root of SD card or a USB drive.
Step 2:Install Firmware into PLEXTALK
In case of PTN2
  • Connect the PTN2 to AC power using the PTN2 power adapter.
  • Insert the SD card or the USB drive with the created folder and turn on PTN2.
  • The installation process will be executed automatically and takes approximately 4 minutes.
  • When upgrade installation is completed, PTN2 will automatically re-boot.
  • Remove SD card or the USB drive after the firmware upgrade and delete the created folder.
[ Firmware upgrades  |  Top of this page  |  Top of contents ]
[ Go to PLEXTOR Site  |  Go to Shinano Kenshi Site ]
©2005 Shinano Kenshi Co., Ltd. All right reserved.
Plextor and Plextalk logo are registered trademark of Shinano Kenshi Co., Ltd.
Other brands and products are trademarks of their respective holder/s.
Specification subject to change without notice.