PLEXTALK PTP1 installation instruction

[ Site Map ]

PTP1

Step 1: Download file

Download the firmware file to your computer.
Execute the .exe file or unzip the .zip file. The program creates new folder "PlexVerUp" and copies data for firmware upgrade.
Copy the created folder to root of SD card.

Step 2:Install Firmware into PLEXTALK
In case of PTP1

Connect the PTP1 to AC power using the PTP1 power adapter.
Insert the SD card with the created folder and turn on PTP1.
The installation process will be executed automatically and takes approximately 4 minutes.
When upgrade installation is completed, PTP1 will automatically re-boot.
Remove SD card after the firmware upgrade and delete the created folder.

[ Firmware upgrades | Top of this page | Top of contents ]

[ Go to PLEXTOR Site | Go to Shinano Kenshi Site ]

©2005 Shinano Kenshi Co., Ltd. All right reserved.
Plextor and Plextalk logo are registered trademark of Shinano Kenshi Co., Ltd.
Other brands and products are trademarks of their respective holder/s.
Specification subject to change without notice.